Kohler 65EOZDJ - Page 14

TT-1602 5/16
14
UMS Sound Shield Kit
Kit: GM88267-KP4
Qty. Description Part Number
4 Bracket, corner extrusion mounting GM85875
3 Bracket, extrusion mounting GM85876
1 Base (66.5 x 30.2 in.) GM86015
4 Corner, sound shield GM86035
4 Cover, sound shield corner GM86036
1 Bulkhead, upper sound shield
(28.5 x 25.1 in.)
GM86074
1 Bulkhead, sound shield (RH)
(10.0 x 7.6 in.)
GM86075
1 Bulkhead, sound shield (LH)
(10.0 x 7.6 in.)
GM86076
2 Rail, sound shield (21.9 in.) GM86078
4 Rail, sound shield (35.0 in.) GM86079
2 Rail, sound shield (58.3 in.) GM86081
1 Rail, internal sound shield (17 in.) GM86083
1 Rail, internal sound shield (21.9
in.)
GM86084
3 Rail, internal sound shield (35.0
in.)
GM86085
18 Bracket, sound shield
(1.7 x 1.7 in.)
GM86091
1 Panel (RH) (41.1 x 35.9 in.) GM88895
1 Panel (front) (23.7 x 35.9 in.) GM88896
1 Panel (LH) (29.6 x 35.9 in.) GM88897
1 Roof, engine (41.1 x 23.7 in.) GM88898
1 Panel, alternator (RH)
(18.9 x 25.2 in.)
GM93025
1 Panel, controller (18.8 x 9.9 in.) GM93008
1 Roof, alternator (18.9 x 23.7 in.) GM88915
1 Panel, rear (23.7 x 29.9 in.) GM88902
2 Fuel line, flex. (70 in.) GM86395
1 Panel, exhaust (11.4 x 35.9 in.) GM88913
1 Panel, bulkhead connection
(23.7 x 5.9 in.)
GM88918
1 Panel, alternator (LH)
(18.9 x 35.9 in.)
GM88917
Qty. Description Part Number
12 Screw, pan head mach.
(M6 x 20 mm)
M965A-06020-20
34 Washer, plain
(0.406 ID x 0.812 in. OD)
X-25-37
24 Screw, hex washer, thread-forming X-67-141
11 Nut, wing (1/4-20) X-276-9
2 Clamp, hose (1/2 in.) X-426-19
1 Clamp, hose (3.56/4.5 in.) X-426-5
1 Union, straight X-695-2
1 Hose (1.25 in. ID x 54 in.) X-6014-66
1
Hose, 45_ (3.0 in. ID)
GM92558
68 Nut, flange spiralock (5/16-18) X-6210-7
68 Bolt, carriage (5/16-18 x 0.75 in.) X-6224-20
14 Bolt, hex cap (3/8-16 x 1 in.) X-6238-11
6 Nut, hex (6 mm) M6923-06-80
6 Screw, hex cap M933-06020-60
6 Washer, plain
(0.281 ID x 0.625 in. OD)
X-25-40
1 Seal, push-on trim X-6422-12
1 Foam (28.4 x 16.4 in.) GM88906-17
1 Foam (8.52 x 7.6 in.) GM88906-18
1 Foam (8.5 x 7.6 in.) GM88906-19
1 Foam (26.3 x 5.3 in.) GM88906-20
1 Foam (11.4 x 8.7 in.) GM88906-21
1 Foam (7.3 x 8.7 in.) GM88906-22
12 Foam (3.6 x 3.6 in.) GM88910
2 Foam (5 x 5 in.) GM88911
6 Foam (48 x 4.5 in.) GM88912
1 Decal, caution GM93648
1 Clamp X-672-32
2 Base plate (30.2 x 32.1 in.) GM88920
75 Insulation hanger stud GM96473
75 Washer, i nsulation hanger stud GM96474
1 Adhesive GM96475
75 Cap, EPSI masking GM55130