Need help?Do you have a question about the Kohler COMMAND 20-25 HP and is the answer not in the manual?
General| Horsepower | 20-25 HP |
|---|---|
| Governor Type | Mechanical |
| Cooling System | Air-cooled |
| Fuel System | Carburetor |
| Starting System | Electric |
| Compression Ratio | 8.5:1 |
| Ignition System | Electronic |
| Starter | 12 Volt |
Defines hazard indicators like WARNING, CAUTION, and NOTE for user understanding.
Warns about injury or death from accidental engine starts and how to prevent it.
Warns about injury from rotating engine parts and advises keeping clear.
Warns about severe burns from hot engine parts and advises caution.
Warns about injury from electrical shock and advises not to touch wires while running.
States product exhaust contains chemicals known to cause cancer or birth defects.
Warns about fire/burns from explosive fuels like LPG and gasoline.
Warns about severe nausea, fainting, or death from carbon monoxide.
Warns about fire/burns from explosive gas during battery charging.
Recommends using proper type and weight of oil for engine longevity and performance.
Provides a table for selecting SAE viscosity grades based on temperature.
Details fuel recommendations and warnings for LPG and dual-fuel engines.
Covers general recommendations, fuel type, and blends for gasoline.
Explains how to interpret engine model numbers and suffixes.
Explains how to find and record engine identification numbers for parts and service.
Lists essential checks before starting the engine for safety and proper operation.
Provides tips for starting the engine effectively in cold weather conditions.
Details the step-by-step process for starting LPG and dual-fuel engines.
Explains the correct procedures for stopping LPG-only and dual-fuel engines.
Covers angle of operation, cooling, hot parts, and engine speed limitations.
Introduces maintenance requirements and warranty service for emission control systems.
Outlines required maintenance procedures and their frequencies.
Provides a step-by-step guide for checking the engine oil level correctly.
Explains the function of the optional Oil Sentry™ oil pressure switch.
Details the procedure for changing engine oil and the oil filter.
Covers cleaning and replacing air cleaner precleaner and paper elements.
Emphasizes keeping air intake and cooling areas clean to prevent overheating.
Details the process for checking, gapping, and replacing spark plugs.
Provides crucial safety warnings and guidelines for charging the battery.
Describes fuel filter service and carburetor troubleshooting, noting dealer service.
Explains LPG regulator function and draining procedure for Nikki regulators.
Guides users through checking fuel system issues before seeking service.
Provides a table linking common engine problems to potential causes.
Outlines steps for storing the engine properly for extended periods.
Explains how to order parts and where to get major repair services.
Lists key technical specifications for CH20-22 and CH25 models.
Details the limited 2-year warranty coverage for Command engines and exclusions.
Outlines the owner's responsibilities for maintaining the engine to ensure warranty validity.
Explains warranty for emission systems, covered parts, limitations, and owner responsibilities.
To Next Page