Kohler Command CV730 User Manual

3
24 590 27 Rev. A
KohlerEngines.com
A Dipstick B Oil Fill C Fuel Filter D Oil Filter
E Oil Cooler F Oil Drain Plug G Debris Screen H
Dust Ejector
Valve
I
Heavy-Duty Air
Cleaner
J End Cap K Element L Inner Element
M
Air Cleaner
Housing
N Inlet Screen O Retaining Clip P Ejector Area
Q
Air Cleaner
Knob
R Rubber Seal S
Air Cleaner
Cover
T Wing Nut
U Element Cover V Precleaner W Paper Element X
Air Cleaner
Base
Y
Low-Profi le Air
Cleaner
Z Oil Fill/Dipstick
G
I
Pre-Start Checklist
1. Check oil level. Add oil if low. Do not overfi ll.
2. Check fuel level. Add fuel if low. Check fuel system components and lines for leaks.
3. Check and clean cooling areas, air intake areas and external surfaces of engine (particularly
after storage).
4. Check that air cleaner components and all shrouds, equipment covers, and guards are in place
and securely fastened.
5. Check spark arrestor (if equipped).
E
D
B
C
F
K
Q
S
T
U
R
V
W
X
Z
Y
A
H
J
N
O
M
P
L

Kohler Command CV730 Specifications

General

Displacement	725 cc
Compression Ratio	8.5:1
Fuel Type	Gasoline
Fuel System	Carburetor
Starter	Electric
Oil Capacity	2.0 quarts (1.9 liters)
Lubrication	Full Pressure
Ignition System	Electronic
Bore x Stroke	83 mm x 67 mm (3.27 in. x 2.64 in.)
Weight	42 kg (92.5 lbs)