C.
Clean or replace the filer if there's not enough water volume or water is not coming out.
Turn off stop valve
Turn power off.
Unplug for trade version Pull down circuit breaker switch for concealed version
Turn off inlet water supply.
Take out filter and clean it.
Tighten
Turn on
Notes:
If filter is found broken or serious blocked, please replace it in time.
Cleaning or Replacing the Filter
Cleaning the toilet filter
Reinstall filter and turn stop valve on.
Inspect joint for any water leak, then plug power cord
Install side board.
The steps to replace filter are the same as the above steps.
switch
handle
To Next Page
Loading...
