Specification
Flush volume
Water efficiency grade*
Level III
Pit distance
305/400mm
Water pressure
Min inlet water pressure 0.07MPa (dynamic)
Max inlet water pressure 0.74MPa
Rated voltage
220V~, 50Hz
Rated power
*
1100W
Max instantaneous power
About 1600W
Power cord length (with power cord version)
Chin
ese version about 1.2m
Product Outline dimension
About 720mm x 432mm x 550mm
Product weight About 51kg
Inlet water temp
1-35℃
Ambient temp
1-40℃
Rear Wash YES, adjustable
Front Wash YES, adjustable
Water flow (water pressure 0.2MPa) Max rear wash shall be no less than 500m /min
Adjust clean water temp
OFF, adjustable 3 dials (ambient temp, about 31-39℃
Clean
Cleaning time (max.) About 300s
Nozzle position adjustment 3 dials
Pulsate massage ON/OFF
Oscillate ON/OFF
Water overtemp protection Thermal fuse
Backflow prevention
Check valve
Temp adjustment OFF, adjustable 3 dials
Safety device
Thermal fuse
Cover Auto OPEN/CLOSE, slow swing, remote OPEN/CLOSE
Comfort
Seat
Slow swing, remote OPEN/CLOSE
Dryer funciton
Dryer
Yes
Safety device
Thermal fuse
Deodorizer function Yes
Remote
Yes, function setting refers to Page -
Nozzle self-clean Yes
Sanitation
Antibacterial material
Cover
UV sanitizing Yes
Other safety devices
Circuit breaker
Auxiliary buttonboard Yes
Seating d etection Located inside the seat
Night light Yes
Auto cover OPEN/CLOSE
Microwave sensing
Manual flush
Yes
IoT function
For partial models (Refer to product configuration table)
*
The description of water efficiency label marked on intelligent toilet: water efficiency label represents a compliance mark of the water efficiency grade etc. performance of intelligent toilet.
*
Power value testing condition: dynamic pressure 0.2MPa, inlet water temp 15
Safety
device
Seat temp
preservation
Other
function
℃.
The above parameters are for the full-functional version. For differences in the specifications of models, refer to their product configuration matrix.
To Next Page
Loading...
