To Next PageTo Next Page
Need help?Do you have a question about the Kohler Irvine E915 and is the answer not in the manual?
The Kohler Irvine E915 (K-28362) is an elongated bidet toilet seat with a remote control, designed to provide advanced cleansing and comfort features.
The primary function of the Irvine E915 is to offer a comprehensive bidet experience with both front and rear wash modes, utilizing continuously heated water for consistent comfort. Users can adjust the water temperature and pressure to their preference. The bidet also includes oscillating and pulsating spray options for a more thorough cleanse. A warm-air drying system with adjustable temperature settings is integrated for post-wash comfort. For hygiene, it features an automatic deodorization function and a self-cleaning function that uses UV light to sanitize the wand surfaces. The seat itself is heated with adjustable temperature settings. The device also incorporates an energy-save function to optimize power consumption.
The Irvine E915 is designed for user convenience and comfort. It comes with a sleek, handheld remote control featuring two programmable user presets, allowing multiple users to save their preferred settings. The cover offers motion-activated, hands-free opening and closing. A "Boost spray" feature automatically adjusts the rear spray mode to its highest pressure for enhanced cleaning. For families, a "Child mode" provides a soft, gentle wash experience. LED lighting illuminates the bowl, serving as a nightlight. The seat is ergonomically designed for comfortable seating. The Quiet-Close™ elongated lid and seat prevent slamming, contributing to a quieter bathroom environment. Grip-Tight bumpers ensure the seat remains firmly in place.
Maintaining the Irvine E915 is straightforward. The Quick-Release™ functionality allows the seat to be easily removed from the toilet, facilitating convenient and thorough cleaning. The self-cleaning function with UV light helps maintain the hygiene of the wand surfaces automatically. The product is covered by a KOHLER® Intelligent Toilet and C3® Cleansing Seat Three-Year Limited Warranty, with detailed information available on the Kohler website.
Installation requires connection to the toilet water supply line and a dedicated electrical GFCI circuit (120V, 15A, 60Hz). Included components for installation are an inlet water supply hose, the remote control, a seat mounting bracket, and a T-fitting. It is crucial to install this product according to the installation instructions. To prevent product malfunction, the seat should not be plugged in until instructed to do so. The receptacle should be located at least 6" (152 mm) above the floor, and within a 32" (813 mm) radius measured 2" (51 mm) from the bowl ledge. An extension cord should not be used with this product. It is also advised not to install this seat in a location where water might splash on the product or where excessive moisture, high humidity levels, or condensation is present, as this could damage electronic components. The Irvine E915 is designed to fit most elongated toilets.
General