Need help?Do you have a question about the Kohler K-156 and is the answer not in the manual?
Specific GFCI and voltage needs for bath installation.
Advisories on operation, modifications, and purge mode.
Lists factory-assembled components included with the bath unit.
Lists necessary tools and materials required for installation.
Crucial pre-installation steps, safety precautions, and site preparation considerations.
Instructions for preparing a new installation site, including framing and subfloor.
Guidelines for preparing an existing alcove, including removal and inspection.
Steps for lifting, leveling feet, and trimming the bath apron if needed.
How to attach clips for gap panels to fill wall-to-bath gaps.
Safe connection of electrical components to GFCI-protected outlets.
Procedures for lifting and leveling the bath using its adjustable feet.
Installing support structures for gap panels for a flush fit.
Completing plumbing, checking door seals, and final hookups.
How to test all bath features like whirlpool, air system, and heated surface.
Final installation tasks, including gap panels, flanges, and securing feet.
Critical safety warnings for injury, shock, and hyperthermia.
Guide to using the airbath features, including speed control.
Instructions for the heated back surface, including temperature control.
How to operate whirlpool jets, adjust mix, and flush the system.
Recommended methods for cleaning bath surfaces and maintaining airjets.
Details of the bath's limited lifetime warranty and claim procedures.
Solutions for common air system, heated surface, and whirlpool issues.
To Next Page
General