Kohler Devonshire K-1124 User Manual

Installation Guide
Bath with Airjets and Integral Apron
K-1112, K-1114, K-1160,
K-1122, K-1124, K-1151,
K-1244, K-1257, K-1357
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de M corresponden a México
(Ej. K-12345M)
Français, page ″Français-1″
Español, página ″Español-1″
1040292-2-E

Kohler Devonshire K-1124 Specifications

General

Brand	Kohler
Model	Devonshire K-1124
Category	Bathtubs
Language	English

Summary

Important Information

Product Information

Electrical Requirements

Details required electrical specifications and safety warnings for the product.

Product Notices

Advises on maintaining the blower motor area for optimal airflow and preventing issues.

Factory-Assembled Features

Lists the components pre-assembled by the factory, indicating no further assembly needed for parts.

Connections and Service Access

Tools and Materials

Before You Begin

Prepare the Site

Prepare the Site - Concrete Construction

Prepare the Bath with Airjets

Secure the Unit

Option Using a Cement or Mortar Bed

Instructions for securing the unit using a cement or mortar bed for leveling and support.

Option Using Construction Adhesive

Instructions for securing the unit using construction adhesive on support blocks.

Secure the Whirlpool

Wood Construction

Details on securing the whirlpool unit to wooden studs using furring strips and nails.

Concrete Construction

Details on securing the whirlpool unit to concrete walls using anchors and screws.

Install the Plumbing

Make Electrical Connections

Test Run the Bath with Airjets

Complete the Finished Wall

Removing the Apron Panel

Clean-Up After Installation

Confirm Proper Operation

Keypad Operation

Explains the functions of the control keypad buttons like On/Off, Purge Mode, and flow control.

Preliminary Checks

Lists essential checks to perform before confirming the air system operation.

Confirm Air System Operation

Guides the user on how to verify the air system is functioning correctly after installation.

Confirm Manual Purge Operation

Details the steps to manually initiate and confirm the purge cycle for residual water.

Confirm Automatic Purge Operation

Outlines how to confirm the automatic purge cycle activates and operates correctly.

Troubleshooting Procedure