To Next Page
A
Anita WestAug 10, 2025
What to do if my Kohler Kitchen & Bath Fixtures whirlpool stops automatically?
- RRobin ButlerAug 11, 2025
If your Kohler Kitchen & Bath Fixtures whirlpool stops automatically, it may be due to several reasons. The GFCI might be tripping, in which case you should identify and correct the source of the fault. A blocked suction requires removing the obstruction. Blocked jets also need the obstruction removed. If the motor overheated, check for blockages at the motor vents, suction, or jets; remove any blockages and allow the motor to cool.
General
