Need help?Do you have a question about the Kohler Sterling 7112 Series and is the answer not in the manual?
General advice on safe entry/exit and water temperature limits to prevent hyperthermia.
Caution regarding bath oils and bubble bath making surfaces slippery.
Lists conventional woodworking tools, lumber, fasteners, sealant, and other necessary items for installation.
Covers subfloor support, foam backing, sealant guidelines, lifting, fasteners, protection, and code compliance.
Inspect for damage, store safely, measure for remodeling, confirm space.
General framing rules, stud placement, tolerances, and fastener types for bath attachment.
Details for alcove, masonry walls, drains, and warnings for accessory installation.
Creating an access panel for future plumbing maintenance.
How to attach the bath, align walls, and ensure proper support.
Ensure proper subfloor support, use padding, and prepare for drain installation.
Guidelines for using mortar cement for leveling and support, including material exclusions.
Providing access, recommended shower elbow height, and installing supply pipes and lines.
Installing shower valving and checking all connections for leaks.
Placing the bath, checking for levelness and support, and adjusting as needed.
Proper methods for lifting, handling, protecting the unit, and installing the drain.
Using clips, nails, or screws; checking stud alignment and using shims.
Step-by-step instructions for attaching the bath using different methods.
Ensuring fastener heads do not interfere with wall surrounds or finished walls.
Installing the back wall first and ensuring the bath surface is clean.
Placing and aligning wall sections, and temporarily fastening the back wall.
Positioning end walls, ensuring flush fit, and adjusting alignment with studs.
Preparing the plumbing end wall by cutting holes for fixtures and cleaning the bath.
Applying sealant before wall installation, its purpose, and preparing the flange.
Applying the L-shaped silicone bead and proceeding to wall surround installation.
Positioning surrounds, maintaining gaps, and securing them to the bath and studs.
Screw warnings, water-resistant material, and sealing joints with silicone.
Addressing potential interference from tabs and their removal.
Specific steps for bath-only installations, including cleaning and gap maintenance.
Using furring strips, water-resistant material, and silicone sealant for the finished wall.
Addressing tab interference and proper removal techniques.
Connecting the drain, installing trim, and timing of showerhead installation.
Flushing water lines, checking for leaks, and installing accessories with sealant.
Specific instructions for installing shower doors and curtain rods.
Identifying and fixing leaks in piping, connections, and seals under the bath.
Addressing water damage on walls and ensuring seams are properly sealed.
Guidance on using mild detergents, avoiding abrasives, and testing cleaners.
Proper cleaning steps, rinsing, drying, and where to find more detailed information.
Details on warranty periods, what is covered, and exclusions for residential and commercial use.
How to get warranty service and information on consumer legal rights.
To Next Page
General
