2. Install the Faceplate
IMPORTANT! Make sure the cords do not get pinched by the
faceplate.
Connect the two cords to their corresponding connectors as
shown.
Attach the manual flush hose to the back of the override housing.
Tuck the cords and hose behind the faceplate.
Position the faceplate over the push rods and press into place.
Warranty
Need help? Contact our Customer Care Center.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Mexico: 001-800-456-4537
For service parts information, visit kohler.com/serviceparts.
For care and cleaning information, visit kohler.com/clean.
Manual
Flush Hose
From
Transformer
1356554-2-B
4 Kohler Co.
To Next Page
Loading...
