Kohler K-18829 User Manual

Installation and Care Guide
In-Wall Tank and Carriage
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K-18829
1246750-2-B

Kohler K-18829 Specifications

General

Brand	Kohler
Model	K-18829
Category	Plumbing Product
Language	English

Summary

Install the Framing

Prepare the Carriage

Install Drain Clamp

Unpack, inspect, and install the drain clamp assembly onto the carriage.

Install Electrical Box for Bidet Seats

Connect the electrical box to the carriage when installing with a bidet seat.

Adjust Carriage Height

Install the Carriage

Connect Power for Bidet Seat Installations

Connect electrical power to the carriage following applicable codes for bidet seat use.

Install the Water Supply

Water Supply for All Installations

Install water supply pipes and connect the waste pipe according to local codes.

Water Supply for Bidet Seat Installations

Install bidet water supply and shut-off with correct clearance for handle access.

Install Plaster Guards

Install Finished Wall

Trim the Flush Shield

Remove Service Cover

Install the Actuator

Install the Faceplate

Care and Cleaning

Troubleshooting

Warranty Information