EasyManua.ls Logo

Kohler K-22847-CP - User Manual

Kohler K-22847-CP
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1419080-2-A
Record your model number:
Noter le numéro de modèle:
Anote su número de modelo:
Français, page 26
Español, página 51
Installation Instructions
Touchless Soap Dispenser
Battery Power

Questions and Answers

  • A
    Andrea MartinAug 10, 2025
    What to do if my Kohler K-22847-CP Dispenser is not dispensing soap?
    • M
      Matthew TaylorAug 10, 2025
      If no soap is coming out of your Kohler Dispenser, there are several potential causes. First, the sensor lens might be dirty, so try wiping it with a clean, dry, soft cloth. Another reason might be that the sensor assembly cable or the tube (soap and air) is disconnected; in this case, reconnect them. Also, verify the power supply connection. If you've recently refilled the soap, the pump may need priming. A blocked dispensing tube or check valve can also prevent soap from dispensing, so clean it with warm water. Lastly, make sure there isn't an object within the sensor range, and if so, remove it and wait 20 seconds.
  • V
    valeriefernandezAug 14, 2025
    How to fix small soap volume from Kohler K-22847-CP?
    • K
      kevincalhounAug 14, 2025
      If the volume of soap dispensed by your Kohler Dispenser is small or nonexistent, the nozzle could be clogged. Remove the soap nozzle and foaming assembly and clean them with warm water. Another possibility is a clogged check valve, which can be removed from the dispensing tube and cleaned with warm water. If neither of these solutions works, the soap pump may not be functioning correctly, and you may need to order and install a new one.
  • W
    waguilarAug 20, 2025
    Why is my Kohler K-22847-CP only dispensing air bubbles?
    • B
      Brooke PotterAug 20, 2025
      If your Kohler Dispenser is dispensing only air bubbles, it could be due to a clogged soap pump outlet. Remove the soap pump tubing and clean the outlet with warm water. Alternatively, the soap pump might be leaking, in which case you should order and install a new soap pump.
  • A
    Alex OliverAug 25, 2025
    Why is my Kohler K-22847-CP Dispenser dispensing only liquid soap instead of foam?
    • R
      Roger McculloughAug 25, 2025
      If your Kohler Dispenser is dispensing only liquid soap instead of foam, there are a few things to check. First, ensure the air pump is properly connected by checking the connection and reconnecting the tube to the control box if necessary. A clogged air pump or tube could also be the issue; remove the air pump tubing and clean the air pump outlet with warm water. If the air pump is not working, you may need to order and install a new one.
  • R
    Ronald YoungAug 30, 2025
    What to do if the blue LED is flashing twice on Kohler Dispenser?
    • A
      Amy ElliottAug 30, 2025
      If a blue LED light flashes twice every 6 seconds on your Kohler soap dispenser, it means the batteries are out of power (lower than 4.5 volts). Replace the batteries and prime the soap dispenser.
  • E
    Elizabeth TuckerSep 4, 2025
    Why is the red LED light flashing twice on my Kohler Dispenser?
    • C
      Carrie ReyesSep 4, 2025
      If a red LED light flashes twice every 6 seconds on your Kohler soap dispenser, it indicates that the soap is either out or very low (90% of cycle used after priming). Refill the soap reservoir with appropriate foaming hand soap and prime the soap dispenser.

Kohler K-22847-CP Specifications

General IconGeneral
Model NumberK-22847-CP
MaterialMetal
FinishPolished Chrome
InstallationWall-mounted
OperationManual
ADA CompliantYes
WarrantyLimited Lifetime Warranty
TypeDispenser
Capacity16 oz
Mounting TypeWall

Related product manuals