Kohler Co.121274372-A05-B June 2016
1
11
12
10
2
3
4
5
9
8
7
6
2min
2)
Standing usage
B. Flush controlled by remote
Customer shall be able to perform toilet flush function by pressing flush FULL or ECO button on remote.
Note: Remote flush function shall not execute twice before complete flushing process .
C. Flush by waving detection on flush control board
D. Flush by manual pressing
Customer shall be able to control flush full or flush ECO by waving hand
over the in-wall tank faceplate.
When power is OFF, auto flush is deactivated.
Press manual flush button on flush control board:
Left button: flush full
Right button: flush ECO (half flush)
Note:
1. User shall be able to use remote to control flush water or manual flush water, or use in-wall tank
faceplate buttons to flush the toilet if auto flush function is OFF.
2. Auto flush function shall be effect when remote “flush setting” is “ON” (Refer to Page 8 for setting).
Flush ECO detection zone
Flush Full detection zone
Flush ECO button
Flush Full button
When the cover is open the user can open the seat manually or by remote. The toilet will automatically flush when the
user leaves the toilet for a period of time. The cover and seat will close after about 2 minutes of disuse.
To Next Page
Loading...
Need help?
General
