3. Install the Sink
Clean the countertop, and carefully position the sink in the
countertop opening.
Fit the control area into the countertop first to prevent damage.
Position the sink in the countertop opening.
Verify the fit and position. Make any adjustments needed.
Apply a thin, continuous bead of quality sealant around the sink
edges.
Immediately wipe away any excess sealant, and fill any voids.
Verify that the sink has not moved out of position.
Allow the sealant to cure at least 30 minutes before proceeding.
Sealant
Kohler Co. 7 1032057-2-B
To Next Page
Loading...
