Kohler K-692 User Manual

3. Flush the Supply Lines
Place the valve outlet hose into a bucket or suitable container.
Turn on the hot and cold supplies.
Turn the faucet handle to the full cold ON position.
Let the water run for one minute to remove any debris.
Rotate the faucet handle to the full hot position.
Let the water run for one minute to remove any debris.
Turn the faucet handle to the OFF position.
4. Connect the Spray Hose
Slide the weight onto the spray hose.
Verify that the hose ends are clean and that the O-ring is in place.
Fully engage the hose ends.
Extend and retract the spray hose to check for smooth operation.
Reposition the supply hoses if necessary.
Weight
Spray Hose
O-Ring
Valve Outlet
Hose
Kohler Co. 5 1013943-2-D

Kohler K-692 Specifications

General

Brand	Kohler
Model	K-692
Category	Plumbing Product
Language	English