Kohler K-72218 Installation And Care Guide

2. Install the Faucet
Slide the washer and ring over the outlet hose, then feed the
supply hoses and wires through.
Thread the ring onto the shank until the washer contacts the
underside of the sink.
Adjust the ring to align the screws with the front and back of the
faucet.
Use a Phillips screwdriver to securely tighten the screws.
Shank
Outlet Hose
Ring
Washer
1/4"
(6 mm)
Kohler Co. 5 1276182-2-C

Kohler K-72218 Specifications

General

Brand	Kohler
Model	K-72218
Category	Kitchen & Bath Fixtures
Language	English