Kohler K-7514 Installation Guide

3. Install the Power Supply - Hybrid Models
NOTE: Avoid the area in front of the sensor for 2 minutes after
connections are complete. The sensor will not function correctly if it
is triggered in the first 2 minutes. Disconnect and reconnect the
power to reset the sensor.
Mount the Hybrid Energy Cell (HEC) under the counter using
two screws (not supplied).
Connect the HEC to the faucet wire.
Avoid the area in front of the sensor for 2 minutes.
Hybrid Models
Faucet Wire
Deck
Hybrid
Energy
Cell
1244026-2-A 6 Kohler Co.

Kohler K-7514 Specifications

General

Brand	Kohler
Model	K-7514
Category	Plumbing Product
Language	English