Tools and Materials
Before You Begin
Observe all local plumbing and building codes.
Shut off the water supply.
This faucet is for use on a single-hole bathroom sink.
For new installations, install the faucet and drain to the sink
before installing the sink.
The faucet shown in this guide may differ from your actual
product. The installation steps still apply.
In order for this faucet to function properly, install the faucet so
the sensor points directly toward the user.
The faucet is rated at3VDC1W.
1-1/4" to 1-1/2"
Hole Bit
1244026-2-A 2 Kohler Co.
To Next Page
Loading...
