Why is the seat not warm on my Kohler Toilet?
If your Kohler Toilet seat is not warm, the seat temperature might be set too low; adjust it to the proper dial. Alternatively, the toilet might be in standby mode; press the “ ” button on the auxiliary panel.
Why does the seat raise when it should not on my Kohler Toilet?
If the seat of your Kohler Toilet raises when it should not, the side sensor might be blocked within the blue zone. Remove any objects blocking the sensor. Also, clean any dirt or debris from the sensor lens.
Why is the seat unable to open automatically on my Kohler Toilet?
If the seat of your Kohler Toilet is unable to open automatically, the side sensor lens may be blocked or dirty. Clean any dirt or debris from the sensor lens, located on the right side of the base of the toilet where blue light is emitted.
Why does the cover not open automatically on my Kohler Toilet?
If the cover of your Kohler Toilet does not open automatically, the auto OPEN and CLOSE function might not be enabled; use the mobile app to enable it. Also, the motion sensor might not be set with the correct sensitivity level; adjust it via the mobile app. Ensure you enter or leave the sensing zone. The toilet may also be flushing; wait until it completes.
Why does the auto flush not work on my Kohler Toilet?
If the auto flush on your Kohler Toilet does not work, ensure that automatic flush is enabled using the mobile app. Also, the smart flush feature requires a sensor under the seat to be enabled. Children less than 122cm tall may not activate this sensor, so flush the toilet using the remote control in such cases.
What to do if the emergency flush is not functioning properly on my Kohler Toilet?
If the emergency flush on your Kohler Toilet is not functioning properly, it could be due to insufficient backup batteries. Try replacing the backup battery pack.
Why does my Kohler Toilet flush unexpectedly?
If your Kohler Toilet flushes unexpectedly, the automatic flush might be enabled. When auto flushing is enabled, the toilet will flush 10 seconds after use. To terminate this function, use the mobile app.
What to do if my Kohler Toilet is not clean after flushing?
If the Kohler Toilet is not clean after flushing, the filter screen may be blocked; in this case, refer to “Clean filter screen”. Also, the water supply pressure might be insufficient. Check if the angle valve is fully open and if the inlet hose is bent. If it is, adjust the hose.
What to do if there is no water in the bowl of my Kohler Toilet?
If the water has evaporated from the bowl of your Kohler Toilet, flush the toilet to refill the bowl.
Why is the water level in my Kohler Toilet bowl too high?
If the water level in your Kohler Toilet bowl is too high, it is possible that the toilet has a blockage. Use a plunger to remove the blockage, or for extreme cases, use a plumbing drain snake tube.
General| Water Consumption | 1.28 GPF |
|---|---|
| Bowl Shape | Elongated |
| Toilet Type | One-Piece |
| Flush Rate | 1.28 GPF |
| Material | Vitreous China |
| Flush Volume | 1.28 gallons |
| Rough-In | 12 inches |
| Seat Included | Yes |
| Seat Material | Plastic |
| ADA Compliant | Yes |
| Smart Features | heated seat, built-in speakers, motion-activated lid |
| Water Connection | 1/2 inch |
| Electrical Requirements | 120 V AC |
| Warranty | 1-year limited warranty |
Details automated flushing, washing, and smart features of the intelligent toilet.
Explains remote operation, docking station, and lighting functionalities.
Describes integrated music playback via Bluetooth and voice control.
Details auto cleansing, emergency flush, and emergency cover flip functions.
Identifies buttons like pairing, standby, flush, and water inlet connections on the back panel.
Step-by-step guide for replacing the deodorizer block and backup batteries.
Instructions for cleaning inlet valve and deodorizer air inlet filter screens.
Guidance on cleaning, inspecting, and replacing the wand and nozzle.
Addresses common issues like remote standby, activation, blockage, and child sensor detection.
Resolves problems related to flushing, water flow, cleanliness, and water levels.
Diagnoses and resolves issues with automatic cover and seat operation and temperature.
Troubleshoots smart cleansing functions, dryer, and remote connectivity problems.
Addresses problems with power, ambient/bowl lights, music playback, and Bluetooth connectivity.
To Next Page
