What to do if Koldfront KIM450BL Ice Maker stops suddenly while making ice?
Ensure that the electricity is on and the power supply line is properly connected. If the room temperature is outside of the recommended range, cut off the electricity and allow the ice maker to stop working until the temperature returns to the stated range.
Why is water leaking out of my Koldfront KIM450BL Ice Maker?
If you notice a few water droplets on the door, it might be due to humidity. Consider moving the unit or being more careful when opening the door. If the water supply connection is leaking, try tightening the fitting.
Why doesn't the water feed into my Koldfront Ice Maker after it starts?
Check if the water supply tap is turned on. Also, verify that the water supply pipe is properly connected; reconnect it if necessary.
Why are the ice cubes from my Koldfront KIM450BL partially formed?
Check if the water supply pressure is below 0.05Mpa, as not enough water in the water bin can cause this issue. Also, check the water supply filter for any restrictions and inspect the water trough for leaks.
Why is my Koldfront KIM450BL Ice Maker so noisy?
Ensure the feet of the ice maker are leveled and locked properly.
Guidelines for safe electrical connections and usage of the ice maker, including grounding and outlet requirements.
Precautions for installation, operation, and use to prevent injury, including ventilation and supervision.
Specifies necessary space around the unit for ventilation and service access.
Outlines the necessary electrical supply, grounding, and circuit specifications.
Warnings and instructions to prevent electric shock during installation and use.
Detailed steps for properly grounding the appliance for safety.
To Next Page
General
