14
KOLDWAVE 3AK (AIRMASTER)
10" DIAMETER EVAPORATOR DISCHARGE
KIT ASSEMBLY SA 040-D-0037
(OPTIONAL)
A single 10" diameter, 10' long wire-reinforced flexible
air duct (part #040-C-0025) can be used with this kit
for remote spot cooling. The duct is secured to a
16-gauge light grey painted galvanneal mounting plate
by a clamp (part #SA019-A-0067). The duct assembly
fits over the evaporator air discharge opening and is
secured by sheet metal screws. The use of the duct
will derate the capacity by approximately 1.0%.
To Next Page
Loading...
