S:\Koldwave\Kompac 4-Series IOM
Koldwave 4830 Transport Drive Dallas, Texas 75247
www.koldwave.com
www.mestekparts.com
1
Koldwave Kompac Installation & Operation Manual
For models 4WK07, 4WK14, 4WK16, 4WK23, 4WK26
Model No._______________________ Serial No._______________________________
ATTENTION: READ THIS MANUAL, FACTORY INSTALLED OPTIONS MANUAL,
UNIT SUBMITTAL DATA SHEETS AND ALL LABELS ATTACHED TO THE UNIT
CAREFULY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE
THESE UNITS. CHECK DATA PLATES FOR ELECTRICAL SPECIFICATIONS
AND MAKE CERTAIN THAT THESE AGREE WITH THOSE AT THE POINT OF
INSTALLATION. RECORD THE UNIT MODEL AND SERIAL NUMBER IN THE
SPACE PROVIDED. RETAIN THIS DOCUMENT FOR FUTURE REFERENCE.
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR
MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. THIS
APPLIANCE MUST BE INSTALLED BY A LISCENCED CONTRACTOR OR
QUALIFIED SERVICE PERSONNEL. READ THESE INSTALLATION, OPERATING
AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR
SERVICING THE UNIT.
WARNING: INSTALL, OPERATE AND MAINTAIN UNIT IN ACCORDANCE WITH
MANUFACTURER’S INSTRUCTIONS TO AVOID ANY DETURING FACTORS
THAT MAY CAUSE PERSONAL INJURY OR PROPERTY DAMAGEDAMAGE.
RECEIVING INSTRUCTIONS: INSPECT SHIPMENT IMMEDIATELY UPON
ARRIVAL TO DETERMINE IF ANY DAMAGE HAS OCCURRED TO THE UNIT
DURING SHIPMENT. AFTER THE UNIT HAS BEEN UNCRATED, CHECK FOR
ANY VISIBLE DAMAGE TO THE UNIT. IF ANY DAMAGE IS FOUND, THE
CONSIGNEE SHOULD SIGN THE BILL OF LADING INDICATING SUCH DAMAGE
AND IMMEDIATELY FILE A CLAIM FOR DAMAGE WITH THE
TRANSPORTATION COMPANY.
INSTALLER’S RESPONSIBILITY: THIS EQUIPMENT HAS BEEN RUN TESTED
AND INSPECTED THOROUGHLY. IT HAS BEEN SHIPPED FREE FROM
DEFECTS FROM OUR FACTORY. HOWEVER, DURING SHIPMENT AND
INSTALLATION, PROBLEMS SUCH AS LOOSE WIRES, LEAKS OF LOOSE
FASTENERS MAY OCCUR. IT IS THE INSTALLER’S RESPONSIBILITY TO
INSPECT AND CORRECT ANY PROBLEMS THAT MAY BE FOUND.
To Next Page
Need help?
General
