S:\Koldwave\Kompac 4-Series IOM
Koldwave 4830 Transport Drive Dallas, Texas 75247
www.koldwave.com
www.mestekparts.com
8
Installation Instruction
Electrical Requirements
Check the data plate on the back of the unit
to make certain that the proper power is
available within plus or minus 10% of the
rated voltage. Refer to the “Specification”
section for voltage and fuse requirements.
Check for proper wall outlet as described in
“Standard Features”. Operating the unit on
improper voltages will void the warranty.
Water Fitting Location
Prior to placing the air conditioner in the
desired position, note the exact location of
the water fittings on the valve plate on the
unit side panel. Water lines should be
securely attached to water valve plate
fittings, and this will be accomplished easily
though the quick connect hose kit provided
along with the unit per customer’s selection
on the hose kit requirement.
To Next Page
Loading...
