Precautions
Caution: Risk of fire/
flammable materials
(Required for R32/R290 units only)
IMPORTANT NOTE: Read this manual
carefully before installing or operating
your new air conditioning unit. Make sure
to save this manual for future reference.
The air conditioner should be installed in accordance with national wiring regulation.
Air Conditioner should be properly grounded. Incorrect grounding may cause electric
shock.
• Do not connect air conditioner to multi-purpose socket. Otherwise, it may cause fire
hazard.
• Do install the air switch. If not, it may cause malfunction.
• Do not spill water on the remote controller, otherwise the remote controller may be
broken.
• Do not spray water on air conditioner. It may cause electric shock or malfunction.
• Do not extend finger or objects into air inlet or air outlet. It may cause personal
injury or damage.
• Do not step on air conditioner, or put heavy objects. It may cause damage or
personal injury.
• Do not block air outlet or air inlet. It may cause malfunction.
• Do disconnect power supply when cleaning air conditioner. Otherwise, it may cause
electric shock.
• Do not repair air conditioner by yourself. It may cause electric shock or damage.
Please contact dealer when you need to repair air conditioner.
• Maintenance must be performed by qualified professionals. Otherwise, it may
cause injury or damage.
• The appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction.
• Children being supervised not to play with the appliance.
Please install the devices for short-circuit protection and electrical leakage protection
when installing the air conditioner. According to the local safety regulations, use
qualified power supply circuit and circuit break.
Working temperature range
Operating Temperature Range
The operating temperature range (outdoor temperature) for cooling only unit is
18°C~43°C.
- 2 -
To Next Page