Is in conformity with the following standards and other normative documents: 2006/42/CE, LVD
2014/35/UE, EMCD 2014/30/UE, EN 62841-2-2:2014, EN 62841-1: 2015, EN 60204-1, EN 61000-6-2, EN
61000-6-4.
It is also in conformity with RoHS III normative (2011/65/UE and following 2015/863).
Name: Giovanni Colasante
Position: General Manager
Person authorized to compile the technical file in Kolver
Thiene, January 1
st
2023 Giovanni Colasante
KOLVER TORQUE ANALYZER
Torque Analyzer software allows for communication between our mini k series torque testers and your PC.
Torque Analyzer software allows the capture of torque measurements directly from the torque tester
including track mode, graphic display readings, and the real-time calculation of the machine capacity
represented by Cm and Cmk dat0061.
1. INSTALLATION
Torque Analyzer is a plug-and-play software.
Just launch the “Kolver_Torque_Analyzer_ver_X_X_X.exe” (X_X_X is the version of the
software).
To Next Page
Loading...
