Kolver MINI K - Page 6

Vers. 140323 rev
Push ON/OFF
Push at the same time
CLEAR+UNIT for 5 sec.
See
“Prg”
After 3 sec. see
“SEnS”
See
“rST”
Push UNIT
See
“CAL”
In case of calibration first
set the weights, then push
ON/OFF
Push UNIT
Push “UNIT” per scorrere la lista.
-TRACK: Track Mode active.
-OFF : Automatic reset off.
-ON : Automatic reset on .
Push “ON/OFF” to save or “CLEAR” to
exit
Push ON/OFF
Automatic detection of FATC.
Once finished, remove the weight and push
“ON/OFF” to save or “UNIT” to go to
Manual Mode to improve the calibration.