9. EXTERNAL TRANSDUCER for miniKe
The MINI KEF and MINI KE/S torque testers consist of a MINI KE torque reader and an external static or
rotary transducer. The static transducer combined with a joint simulator allows you to check the torque
measured by the screwdriver and calibrate it according to your needs. The rotary transducer is the ideal tool
for verifying the real torque applied by the screwdriver directly on the screw (and not on a joint simulator).
Thanks to the modification of the FATC (correction factor) and the SENS (full scale value of the connected
transducer), it is possible to calibrate several external transducers in a single MINI KE reader (see
Programming Menu).
Rotary and non rotary transducers for lower or higher torque ranges available on request.
The minike can read torque up to 500 Nm.
MINI KE READER
Set date and hour:
Push “UNIT” to set hour.min
(24hours, day.month.year.
At each digit push “ON/OFF” to save or
“CLEAR” to exit.
To Next Page
