.
OPERATION
EXPLANATION OF COMPONENTS
FILTER/OIL CHANGE INTERVAL LAMP
(Yellow)
This lamp (2) lights up when the time for replacing the filter or oil is
near.
REMARK
This lamp (2) lights up if there is less than 30 hours remaining until
replacement, and flashes when the replacement interval has
passed.
At the same time, maintenance caution lamp (A) also lights up.
After replacing the indicated filter or oil displayed on display panel
B (multi-information), reset the interval. For details, see "METHOD
OF USING MAINTENANCE MODE (PAGE 3-27)".
The lamp goes out.
FAN OPERATION CONFIRMATION LAMP
(Orange)
If the fan rotation selector switch is operated when the engine is
running, this lamp flashes to warn the operator that the fan
operation cannot be switched.
Before the engine starts, if the starting switch is turned to the ON
position and the fan rotation selector switch is set to the reverse
mode (REV) position or clean mode (CLN) position, lamp (3)
lights up to inform the operator that the fan is set to reverse
mode (REV) or clean mode (CLN). After the engine starts, the
lamp goes out.
3 - 24
To Next Page
Loading...
