.
OPERATION
EXPLANATION OF COMPONENTS
DISPLAY OF CHARACTER DISPLAY
The following items can be displayed on the character display.
(1)
(2)
(3)
Service meter
Odometer
Reverse travel odometer
(4)
(5)
(6)
Action code display
Filter, oil replacement time display
Payload display (if equipped)
Normally, service meter (1) is displayed on the top line and odometer (2) is displayed on the bottom line.
Reverse travel odometer (3) and payload display (6) can be displayed by switching the display.
If any failure occurs on the machine, action code (4) is automatically displayed.
When the time is reached for replacing the filters or changing the oil, after the system check is completed when
the starting switch is turned ON, the maintenance monitor caution lamp flashes or lights up and the filter, oil
replacement time (5) is displayed for the items that need replacing.
SERVICE METER
The total hours of operation is displayed on the top line of the character display.
If the engine is running, the service meter advances even if the machine is not moving.
The meter advances by 1 for every one hour that passes, regardless of the engine speed.
ODOMETER
The total distance travelled is displayed in units of km on the bottom line of the character display.
REVERSE TRAVEL ODOMETER
The total distance travelled in reverse is displayed in units of km.
For details of the reverse travel odometer display, see "OTHER FUNCTIONS OF CHARACTER DISPLAY (PAGE
3-33)".
3 - 29
To Next Page
Loading...
Need help?
General
