MAINTENANCE OF ADDITIONAL FILTER FOR BREAKER
WARNING
• After the engine is stopped, its parts and oil are still very hot, and may cause burn injury. Wait for
the temperature to go down, and then start the work.
• When using the compressed air, there is a danger that dirt may scatter and cause personal injury.
Wear the protective equipment such as the protective eyeglasses and dust mask.
NOTICE
For the element replacement interval, see “MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER”.
Items to be prepared
Container to catch drained oil
Prepare for the maintenance so that it can be performed as follows.
1.
Lower the work equipment to the ground and stop the en-
gine.
2.
Turn the starting switch to ON (B) position.
3.
Operate the operating portion (g) of the lock lever to set it
to FREE position (F).
ATTACHMENTS AND OPTIONS HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
6-27
To Next Page
Loading...
Need help?
General
