SAFETY, NOISE AND VIBRATION PLATES
26
2.1.3 POSITION OF THE NOISE PLATES
ON MACHINES WITH CAB
NOISE OUTSIDE THE CAB
NOISE INSIDE THE CAB
RYA11900
• The noise plates must always be legible and in good condi-
tions; for this reason, if they are dirty with dust, oil or grease, it
is necessary to clean them with a solution made of water and
detergent.
Do not use fuel, petrol or solvents.
• If the plates are damaged, ask for new ones to Komatsu Utility
or to your Komatsu Utility Dealer.
• In case of replacement of a component provided with a noise
plate, make sure that this plate is applied also on the new
piece.
RYA11910
L
WA
( 89/514/CE - 95/27/CE )
• This value indicates the noise level outside the machine and
refers to the noise perceived by persons in the vicinity of the
work area.
RYA11920
L
p
A
( 89/514/CE - 95/27/CE )
• This value indicates the maximum noise level perceived by the
operator’s ears inside the cab when this is completely closed.
To Next Page
Loading...
Need help?
General
