To Next PageTo Next Page
Need help?Do you have a question about the Komatsu PC270-8 and is the answer not in the manual?
General| Swing Speed | 11.5 rpm |
|---|---|
| Travel Speed | 5.5 km/h |
| Max Digging Depth | 6, 620 mm |
| Engine Model | SAA6D107E-3 |
| Bucket Capacity | 0.8 - 1.3 m³ |
Highlights low fuel consumption, low emission engine, and economy mode for reduced environmental impact.
Details the low-noise, low-vibration, pressurized cab with an ergonomic operator seat and console.
Focuses on features like long replacement intervals, remote filters, and side-by-side cooling for simplified maintenance.
Outlines features like cab protection, anti-slip plates, improved mirrors, and optional rear view monitoring.
Details the Komatsu SAA6D107E-1 engine meeting EPA Tier 3 and EU Stage 3A emission regulations.
Explains features like low-noise engine and sound-absorbing materials that reduce operational noise.
Focuses on the engine's multi-staged fuel injection and hydraulic matching for reduced fuel usage.
Describes P mode (power) and E mode (economy) for optimizing performance and fuel efficiency.
Explains the Eco-gauge on the monitor to promote energy-saving operations and reduce emissions.
An on-monitor alert to prevent unnecessary fuel consumption when the engine idles for extended periods.
Highlights excellent slope climbing performance due to high drawbar pull, enhanced by optional travel motor.
Describes the highly rigid cab with excellent sound absorption and use of low-noise components.
Details viscous damper mounting with springs and longer stroke for reduced vibration at the operator seat.
Features a spacious cab with a reclining seat, adjustable armrest, and console for optimal posture.
Explains how optional air conditioner and higher internal pressure prevent external dust entry.
Details the climate control system with bi-level function, defroster, and precise temperature setting.
Includes cab protection, anti-slip plates, improved mirrors, rear view monitoring, and OPG top guard.
User-friendly, multi-lingual monitor with TFT display for safe, accurate, and smooth operation.
Monitors engine oil, coolant, battery, and air filters, displaying abnormalities on the LCD.
Parallel arrangement of radiator, aftercooler, and oil cooler for easy cleaning and service.
Remote mounting of engine oil filter and fuel drain valve improves accessibility for maintenance.
Includes a fuel pre-filter with a water separator to remove water and contaminants from fuel.
Features an easy-to-clean cab floormat with a gently inclined surface and drainage holes.
400-liter fuel tank with effective corrosion resistance and rustproof treatment.
Designed to prevent dirt and sand accumulation, allowing for easier mud removal.
Facilitates easy opening and closing of the engine hood with gas-assisted cylinders.
Utilizes high-performance materials for oil and filters, extending replacement intervals.
Optional air conditioner filter is easily removed and installed without tools for convenient maintenance.
Optional bushings and resin shims extend the greasing interval for work equipment pins to 500 hours.
Details engine model, aspiration, cylinders, bore, stroke, displacement, and horsepower.
Covers hydraulic system type, main pump, motors, relief valve settings, and cylinder dimensions.
Information on swing drive method, reduction, lubrication, brake, and speed.
Details center frame, service brake, holding brake, track adjuster, and shoe specifications.
Lists the capacities for fuel tank, coolant, engine oil, hydraulic oil, and hydraulic tank.
Provides detailed measurements for overall length, height, width, and ground clearance.
Illustrates reach and depth capabilities for various arm lengths and provides digging force data.
Shows approximate operating weights and ground pressure for PC270-8 and PC270LC-8 models.
Details bucket capacities, widths, weights, and arm lengths for optimal attachment configuration.
Provides lifting capacity data for the PC270-8 model across various reach and load configurations.
Provides lifting capacity data for the PC270LC-8 model across various reach and load configurations.
