.
OPERATION
MACHINE OPERATIONS AND CONTROLS
PARKING MACHINE
WARNING
Avoid stopping suddenly. Give yourself ample room when stopping.
Park the machine on the firm, level ground.
Avoid parking the machine on slopes.
If it is unavoidably necessary to park the machine on a slope, put blocks
under the tracks and dig the work equipment into the ground surface to
stop the machine from moving.
If the control levers are touched by accident, the work equipment or
machine may move suddenly, and this may lead to a serious accident.
Before standing up from the operator's seat, always set the lock lever
securely to the LOCK position.
Set the blade on the downhill side and lower it to the ground.
1. Put the left and right travel levers (1) in the NEUTRAL position,
then stop the machine.
2.
Lower fuel control lever (2) to low idle position (A) to reduce the
engine speed.
(B): High idling
3 - 85
To Next Page
Loading...
Need help?
General
