.
OPERATION
DETAILED CONTROLS AND GAUGES
WINDSHIELD
(PC750-7, PC750LC-7, PC750SE-7 full cab specification machine only)
WARNING
When opening or closing the front window, bottom window, or door,
always set lock lever (1) to LOCK position (L).
If the control levers are not locked and they are touched by accident,
this may lead to a serious accident.
When opening or closing the window at the front of the cab, stop the
machine on horizontal ground, lower the work equipment completely to
the ground, stop the engine, then carry out the operation.
When opening the front window, hold the grip securely with both hands,
pull up, and do not let go until the automatic lock catch is locked.
When closing the front window, the window will move quicker under its
own weight. Hold the grips securely with both hands when closing it.
It is possible to stow (pull up) the front window in the roof of the operator's compartment.
Opening
1.
Stop the machine on level ground, lower the work equipment completely to the ground, then stop the engine.
2. Set the lock lever securely in the LOCK position (L).
3.
Check that the wiper blade is stowed in the right stay.
3 - 39
To Next Page
Loading...
Need help?
General
