Komatsu PC800-7 - Door Lock; Emergency Exit from Operators Cab

.
OPERATION
DETAILED CONTROLS AND GAUGES
EMERGENCY EXIT FROM OPERATOR'S CAB
If for some reason, the cab door does not open, remove the rear
window and use it as an emergency escape.
Remove the rear window as follows.
1.
Pull ring (1) and completely remove seal (2) from the rubber
core.
2. With pressure push on corner of the window, the glass will fall
outside.
Do not remove the rear window except when using it as an
emergency exit.
DOOR LOCK
Use the door lock to fix the door in position after opening it.
1.
Push the door against catch (1) to lock it in position.
2. To release the lock, press knob (2) down at the left side of the
operator's seat to release the catch.
When fixing the door, fix it firmly to the catch.
3 - 44