OPERATION OPERATION
119
MOVING MACHINE OFF
MOVING MACHINE FORWARD
WARNING
● When moving off, check that the area around the
machine is safe, and sound the horn before moving.
● Clear all personnel from the machine and the area.
● Clear all obstacles from the path of the machine.
● If the lever is moved inside the deceleration range,
engine speed will rise suddenly. Operate the levers care-
fully.
● Ensure that the undercarriage is in the normal forward
direction
● Check service brake just after moving off.
● Check that low brake pressure warning lamp is off
1. Set swing lock switch (1) to the ON (actuated) position and
confirm that swing lock monitor lamp (2) lights up. Although
the hydraulic swing lock ((1) above) may be adequate for nor-
mal job site working, it is a legal requirement in some coun-
tries to use a mechanical lock when driving on public roads.
2. Turn fuel control dial (3) towards the high idling position to
increase the engine speed.
3. Lower the control lever pad (4) to the FREE position set PPC
lock switch to on position, fold the work equipment, and raise
it 40 - 50 cm from the ground.
AM090500A
To Next Page
Loading...
Need help?
General
