EXPLANATION OF COMPONENTS OPERATION
80
30. 12V POWER SUPPLY
The 12V socket provided on the right hand panel may be used
only for electrical accessorIes drawing 1,5 A. maximum. Any
accessories attached to this socket must carry the EC mark.
CONTROL LEVERS, PEDALS
1. CONTROL LEVER PAD SAFETY LOCK
WARNING
● When leaving the operator’s compartment, switch PPC
lock switch to off position, raise the control lever pad to
the LOCK position. If the control levers are not locked,
and they are touched by mistake, this may lead to a seri-
ous accident.
If the control lever pad safety lock lever is not placed
securely in the LOCK position and lock switch is not off,
To Next Page
Loading...
Need help?
General
