Komatsu WA70-7 User Manual

1.3 Introduction Foreword
1-8 WA70-7 – VENAM02003
1.3 Introduction
This loader is an independently powered machine moving on
wheels. Using the equipment (e.g., a bucket or fork) installed to
its front, the loader can be used to load or dig material while
moving forwards.
This Komatsu machine is designed to be used mainly for the fol-
lowing work:
 Digging
 Smoothing
 Pushing
 Loading
1.3.1 Intended use
If you use the machine for any other purpose than those speci-
fied above, we will not accept any responsibility for its safety.
Any considerations regarding safety will then be up to the owner
or the operating and maintenance personnel. In any case, nei-
ther you nor any other person are/is authorised to perform work
and functions explicitly prohibited in these operating instructions.
The transport of persons in the work equipment is strictly forbid-
den!
For details of the operating procedure, see
chapter 3.3.10 “Working with the wheel loader” (3-77).

Komatsu WA70-7 Specifications

General

Brand	Komatsu
Model	WA70-7
Category	Front End Loaders
Language	English