Safety 2.4 Precautions for maintenance
WA70-7 – VENAM02003 2-35
Safety relevant parts
The quality of the components can be susceptible to regular
wear and tear. Therefore replace safety relevant components on
a regular basis with new parts, irrelevant of the fact if they are
functional or not.
Safety relevant parts include:
Fuel system:
Fuel hose
Fuel spill hose
Tan k cap
Hydraulic system:
all hydraulic hoses
Replace or repair safety-critical parts if any defect is found, even
when they have not reached the time specified interval. Hydrau-
lic hoses have to be replaced every 2 years.
In order to ensure safe assembly and operation of the machine,
it is recommended that you use Komatsu genuine parts.
For details see 5.6 “Periodic replacement of safety-critical parts”
(5-23).
Keeping the worksite clean
Do not leave tools lying around the worksite. Remove grease, oil
and other substances that may cause a slip hazard. Always
keep the worksite tidy and clean to ensure safe completion of
work. If the worksite is not kept tidy and clean there is a risk of
tripping, falling or slipping, which can lead to injury.
To Next Page
Loading...
Need help?
General
