Komatsu WA70-7 User Manual

1.1 Foreword Foreword
1-4 WA70-7 – VENAM02003
EU Directives
Machines delivered by Komatsu are compliant with the Machine
Directive 2006/42/EEC and its amendments. If the machine is
used in another country, it is possible that certain safety devices
and specifications may not be compliant with the requirements
applicable in the country of use. For example, warning beacons
may be used in some countries while being prohibited in others.
If there is any question about whether your product complies
with the applicable standards and regulations of your country,
consult your Komatsu distributor before operating the machine.
Notes on subsequent installation of electrical and electronic
equipment and components
Electrical and electronic equipment and/or components installed
after delivery emit electromagnetic radiation which may possibly
influence the function of the electronic components and assem-
blies of the machine. This may affect the safety of the machine
or endanger persons. For this reason, please ensure that the fol-
lowing safety instructions are observed.
If you are installing electrical or electronic equipment and/or
components in the machine and connect them to the vehicle's
electrical system, you are obliged to have the installation verified
for not interfering with vehicle's electronic system or other com-
ponents. In particular, please ensure that any subsequently
installed electrical and electronic components comply with the
EMC Directive 2004/108/EC in their currently valid version and
that they have CE labels.
The following requirements also have to be met for subsequent
installation of mobile communication systems (e.g. radio, tele-
phone):
 Only equipment approved by national legislation (e.g. BZT
approval for Germany) may be installed.
 The unit must be fixed in position.
 Portable or mobile units may only be used inside the vehi-
cles if they are connected to a fixed outside antenna.
 The transmitter unit must be spatially separated from the
vehicle’s electronic system.
 Ensure that the antenna is installed properly with a good
earthing connection between the antenna and the vehicle
earth.
Also observe installation instructions by Komatsu or the manu-
facturer for wiring, installation and maximum permitted power
consumption.

Komatsu WA70-7 Specifications

General

Brand	Komatsu
Model	WA70-7
Category	Front End Loaders
Language	English