Komatsu XT430-2 User Manual

CEAM029102
Operation & Maintenance
Manual
XT430 -2
XT430L -2
XT450L -2
CRAWLER FELLER
BUNCHER/HARVESTER
SERIAL NUMBERS XT430-2 A1035
XT430L-2 A2039
and up
XT450L-2 A4053, A4057
ENGINE
QSC 8.3
This material is proprietary to Komatsu America Corp. and is not to be reproduced, used, or disclosed except in
accordance with written authorization from Komatsu America Corp.
It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to make
changes or improvements at any time without incurring any obligation to install such changes on products sold previously.
Due to this continuous program of research and development, revisions may be made to this publication. It is
recommended that customers contact their distributor for information on the latest revision.
Copyright 2016 Komatsu
Printed in U.S.A.
Komatsu America Corp.
March 2016

Komatsu XT430-2 Specifications

General

Brand	Komatsu
Model	XT430-2
Category	Construction Equipment
Language	English

Summary

Introduction to Operation and Maintenance

Foreword

Provides rules and guidelines for safe and effective machine use.

Safety Information Overview

Explains hazard signal words (DANGER, WARNING, CAUTION) and their meanings.

Safety Labels Explained

Details the types and usage of safety labels on the machine.

Machine Orientation

Illustrates machine orientation for operating instructions.

Machine Identification and Structures

Covers protective structures, breaking-in procedures, product info, and ID plates.

Engine and Regulatory Information

Details engine dataplate, EPA regulations, and distributor information.

Operational and Maintenance Topics

Covers fire prevention, general operation, service precautions, and controls.

Fluids, Lubricants, and Filters

Information on recommended fluids, coolants, and filters.

Technical Specifications and Components

Details machine specifications, undercarriage, upper structure, and electrical center.

Safety Precautions and Warnings

Safety and Warning Decals Location

Illustrates the location and types of safety decals on the machine.

Specific Safety Warnings (Page 27)

Details warnings on slippery surfaces, lubricators, and staying away from machine.

Operational Hazards and Precautions (Page 28)

Covers warnings on crush zones, jump-starting, explosion risks, and swing areas.

System and Component Warnings (Page 29)

Details warnings for hot oil, fan guards, ether use, and engine shutdown procedures.

Electrical and Fluid System Notices (Page 30)

Provides notices on electrical systems, hydraulic support, hot water, and coolant.