INTRODUCTION
XT430-2,XT430L-2,XT450L-2 0-5
INTRODUCTION
This manual has been designed to introduce the Operator to the safe and proper use of the Komatsu XT430-2, XT430L-2, and
XT450L-2 Series Track Machines. The instructions furnished in this manual cover the basic machines with the most common
control configurations and options. Customized control settings are not covered in this manual.
Machine Orientation
The following graphics illustrates the machine orientation used throughout the manual. All operating instructions are written
from the operator's viewpoint, seated in the cab, facing forward with the track drive sprockets towards the rear of the machine.
Make sure that you know where the track drive sprockets are in relation to the direction you are facing. If
you have rotated the cab 180° and are facing the track drive sprockets, you will have to press downwards
with your heels on the bottom end of the pedals (reverse) to travel in the direction you are looking.
Find manuals at https://best-manuals.com
To Next Page
Loading...
