What causes low supply air temperature in Komfovent Controller?
If you are experiencing low supply air temperature with your Komfovent Controller, the heating equipment may have failed to operate, or its capacity may be insufficient. Check the heating equipment.
What to do if the electric heater is off in my Komfovent C5 Controller?
If the electric heater is off in your Komfovent Controller because the heater is disconnected due to too low air volume, the protection resets automatically once the heater cools down. It is recommended to increase the ventilation intensity level.
What causes heat exchanger icing in my Komfovent C5 Controller?
Heat exchanger icing in your Komfovent Controller may form under a low outdoor temperature and high room humidity. Check the operation of the rotation heat exchanger drive or the air bypass damper of the plate heat exchanger.
What to do for supply air temperature sensor failure in Komfovent C5 Controller?
If you are experiencing a supply air temperature sensor failure in your Komfovent Controller, it may be because the sensor is not connected or is broken. Check the connections of the sensor or replace the sensor.
What to do for extract air temperature sensor failure in Komfovent Controller?
If you're facing an extract air temperature sensor failure in your Komfovent Controller, it could be due to the discharged air temperature sensor not being connected or being broken. Check the sensor connections or replace the sensor.
What to do for outdoor air temperature sensor failure in Komfovent Controller?
If the external air temperature sensor is not connected or broken in your Komfovent Controller, check the connections of the sensor or replace the sensor.
What to do if there is an internal fire alarm in Komfovent Controller?
If there is an internal fire alarm in your Komfovent Controller, indicating fire danger in the ventilation system, check the ventilation system and find the source of the heat.
What causes high supply air temperature in Komfovent C5 Controller?
If you are experiencing high supply air temperature with your Komfovent Controller, the heating equipment may not be controllable because the mixing valve or contactor is blocked. Check the heating equipment.
What causes heat exchanger failure in Komfovent C5?
Heat exchanger failure in your Komfovent Controller can be caused by a blocked or non-rotating rotor, or by-pass damper failure. Check the rotor drive, replace the belt, or check the by-pass channel operation.
What causes VAV calibration to fail in Komfovent C5 Controller?
A VAV calibration failure in your Komfovent Controller can occur if the pressure sensors are not connected or are broken. Check the sensor connections or replace the sensor.
General| Brand | Komfovent |
|---|---|
| Model | C5 |
| Category | Controller |
| Language | English |
To Next Page
