EasyManua.ls Logo

Komfovent VERSO Standard User Manual

Komfovent VERSO Standard
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VERSO STANDARD
INSTALLATION MANUAL

Other manuals for Komfovent VERSO Standard

Question and Answer IconNeed help?

Do you have a question about the Komfovent VERSO Standard and is the answer not in the manual?

Komfovent VERSO Standard Specifications

General IconGeneral
BrandKomfovent
ModelVERSO Standard
CategoryAir Handlers
LanguageEnglish

Summary

Introduction and Unit Types

Safety Requirements for Air Handling Units

Essential safety precautions and guidelines for handling and installing the air handling unit.

Verso Standard Unit Types and Sizes Overview

Overview of different Verso Standard air handling unit models, their variations, and airflow capacities.

Unit Types by Heat Recovery

Classification of units based on the heat recovery system (rotary or counter-flow recuperators).

Unit Types by Duct Connections

Categorization of units based on duct connection configurations (horizontal, vertical, flat, universal).

Unit Types by Inspection Sides

Details on unit configurations based on the side designated for inspection and access.

Horizontal Unit Components

Diagrams and component layouts for horizontal Verso Standard air handling units.

Unit Transportation, Storage, and Mechanical Installation

Unit Transportation and Storage Guidelines

Guidelines for safe and proper transportation and storage of the air handling unit.

Mechanical Installation Requirements

Specifies requirements for the installation site and the base structure, including leveling.

Inspection Area for Maintenance

Defines the necessary clearance around the unit for maintenance, inspection, and servicing.

Connection of Unit Sections

Instructions for connecting modular sections of larger air handling units.

Duct System Installation Guide

Guidelines for designing and installing the air intake and exhaust ductwork systems.

External Heating/Cooling Device Installation

Procedures for connecting external heating or cooling components to the unit.

Condensate Drain Connection

Instructions for correctly connecting the condensate drainage system, including siphon requirements.

Technical Information, Dimensions, and Electrical Installation

Technical Specifications and Data

Table detailing technical specifications, capacities, and power requirements for various unit models.

Horizontal Unit Dimensions

Detailed dimensional drawings and data for horizontal unit configurations.

Vertical Unit Dimensions

Detailed dimensional drawings and data for vertical unit configurations.

Flat Unit Dimensions

Detailed dimensional drawings and data for flat unit configurations.

Electrical Connection Requirements

Essential requirements for safe and compliant electrical connections, including grounding and circuit breakers.

Electrical Component Connection

How to connect internal and external electrical components to the unit's control panel.

Control Panel Installation Procedures

Guidelines for installing the control panel, including environmental conditions and mounting.

Network Connectivity Setup

Steps for connecting the unit to a network for remote control via computer or smart phone.

Filters and Commissioning

Filter Information and Replacement

Information about the types of filters used, their function, and monitoring contamination levels.

Control Panel C5.1 Operation

Detailed description of the C5.1 touch-screen control panel for unit operation and settings.

Starting Unit via Computer Control

Procedure for operating the unit using a computer via a web browser interface.

Quick Inspection Checklist

A checklist for verifying proper installation and initial operation of the unit.

Related product manuals