Konftel 300IP Installation Guide

Konftel 300IP Installation Guide
ENGLISH
110046-61-001 Rev 1d
This installation guide explains how to install the Konftel 300IP and make the basic settings.
For further instructions, please visit www.konftel.com/300ip where you’ll nd a user guide with
full details of all the features as well as the “Installation and Administration of Konftel 300IP”
manual with a detailed description of all connection options and settings.
Connecting

Connect the Konftel 300IP to
the network as illustrated below.
Konftel 300IP supports PoE (Power
over Ethernet).
 If the network does not support PoE,
an optional Konftel AC adapter must
be used for connection to the mains.

Place the conference phone in the mid-
dle of the table.
The conference phone can be registered in a company SIP switch or PBX or with a public IP
telephony service provider. You can store settings for two accounts in the Konftel 300IP. To
register your phone, you must have access to the account information and all the settings that
the SIP switch or service provider requires.

Select Settings > SIP.

Click Yes next to Enable account under Account 1.

Enter the account information you have received.


Account name: Here you choose the name or phone number you want to appear in the
phone’s display.
 Leave the default values if you have no other information.

Select a method of NAT traversal if this is required.

Save the settings by clicking the Save button.
The Konftel 300IP responds by showing REGISTERING. If the registration is successful, your selected
account name appears at the bottom of the display with a shaded square in front of it.
 In some cases, it may also be necessary for you to make security settings on the Media tab.
See “Installation and Administration of Konftel 300IP”.
REGISTER AN ACCOUNT
SD memory card port
Expansion
microphone
port
Power supply
Security lock port
AUX port
Network cable port
Expansion microphone port
Ethernet and PoE connection
AC-adapter (Optional)

Konftel 300IP Specifications

General

Call waiting	Yes
Volume control	Digital
Display resolution	128 x 64 pixels
Wireless connection	No
RJ-45 ports quantity	1
Frequency range	200 - 7000
Cabling technology	Ethernet 10/100 Base T
Dimensions (WxDxH)	240 x 240 x 77 mm
Security algorithms	SRTP
Product color	Black
Safety	EN 60950-1:2006, ANSI/UL 60950-1-2002, CAN/CSA-C22.2, N o. 60950-1-03
Certification	RoHS
Compliance industry standards	IEEE 802.3af
Electromagnetic compatibility	EN 301 489-3 V1.4.1 (2002-08), EN 301 489-1 V1.6.1 (2005-09), F CC Part 15 B class A, F CC Part 15 C, EN 300220-1:2000, EN 300220-2:2000
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
Power requirements	100 - 240 V AC/13.5 V DC
AC adapter output voltage	13.5 V
Phonebook capacity	1000 entries
Flash memory	2 MB
Quantity per pallet	72 pc(s)
Quantity per master (outer) case	6 pc(s)
Control type	Buttons
Product type	IP conference phone
Cable lock slot type	Kensington
Networking standards	IEEE 802.3ab, IEEE 802.3af
Sound pressure level	90 dB
Recommended room size	Medium room
Compatible memory cards	SD, SDHC
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Microphone pick-up range	4.5 m
Microphone direction type	Omnidirectional
Suitable for room area up to	30 m²
Cables included	LAN (RJ-45)
Sustainability certificates	Low Voltage Directive (LVD), REACH, RoHS, WEEE
Warranty period	2 year(s)

Weight and Dimensions

Width	240 mm
Height	77 mm
Weight	1000 g
Package depth	300 mm
Package width	270 mm
Package height	115 mm
Package weight	1520 g