Konftel 300W - Adjusting Date and Time; Adjusting Flash;R-Pulse Duration; Adjusting Ring Level Volume

28
ADJUSTING DATE AND TIME
Changing the date

Select MENU > SETTINGS > TIME DATE > DATE (2,4,1).

Change the ashing gures for the year using the arrow buttons or by entering the
gures on the keypad. Press OK to conrm and to continue to the month, and then
proceed in the same way for the day.
Changing the time

Select MENU > SETTINGS > TIME DATE > TIME (2,4,2).

Change the ashing gures for the hour using the arrow buttons or by entering the
gures on the keypad. Press OK to conrm and to continue to minutes.
Changing the time format

Select MENU > SETTINGS > TIME DATE > TIME FORMAT (2,4,4).

Select either a 12-hour or a 24-hour format using the arrow buttons and press OK
to conrm your choice.
ADJUSTING RING LEVEL VOLUME

Select MENU > SETTINGS > RING LEVEL (2,5).

Select your choice and press OK to conrm.

There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone ashes when an
incoming call is received.
ADJUSTING FLASH/R-PULSE DURATION
The R pulse/Flash (Register recall) is used to request a new line from the PBX. Different
countries and PBXs may require different durations for activating the pulse. Duration
requirements should be specied in the technical data for the PBXs.

Select MENU > SETTINGS > FLASH (2,6).

Select your choice and press OK to conrm.

Applicable settings:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
SETTINGS