Kongsberg cNODE MiniS Information Letter

2 pages

To Next Page

410489/A/2016–02–19

ConnectingthecNODEbattery

charger

Itisveryimportanttoreadtheproceduresbefore

connectingthecNODEbatterychargertothe

cNODEMiniS.

Prerequisites

Note

AlwaysconnectthecNODEbatterychargerto

thecNODEMiniSbeforeconnectingthecNODE

batterychargertothemains(110or220V ac).

Context

Procedure

1ConnectthecNODEMiniStothecNODE

batterycharger.

2ConnectthecNODEbatterychargerto

mains(110or220Vac).

DisconnectingthecNODEbattery

charger

Itisveryimportanttoreadtheproceduresbefore

disconnectingthecNODEbatterychargerfrom

thecNODEMiniS.

Prerequisites

Note

AlwaysdisconnectthecNODEbatterycharger

fromthemains(110or220Vac)before

disconnectingthecNODEbatterychargerfrom

thecNODEMiniS.

Context

Procedure

1DisconnectthecNODEbatterychargerfrom

mains(110or220Vac).

2DisconnectthecNODEMiniSfromthe

cNODEbatterycharger.

KongsbergcNODEMiniS

Informationletter–Proceduresforexternal

connections

Other manuals for Kongsberg cNODE MiniS

Instruction Manual62 pages

Quick Reference Guide3 pages

Questions and Answers:

J
jeffery73Aug 4, 2025
What to do if Kongsberg cNODE MiniS Marine Radio charger is flashing red?
- F
  frank86Aug 4, 2025
  If the Kongsberg Marine Radio charger's LED is flashing red, it could be due to the charger not being connected, a connection failure, or a faulty charger. Try disconnecting all cables, waiting one minute, and then reconnecting them, ensuring the power supply is connected to the mains (110 or 220 Vac). If the LED continues to flash red, the charger may be faulty, and you should contact your local Kongsberg Maritime office.
C
Clayton GeorgeAug 19, 2025
Why is my Kongsberg Marine Radio showing a steady red light?
- P
  Pamela ColemanSep 12, 2025
  A steady red light on your Kongsberg Marine Radio indicates that the battery temperature may be outside the specified charging range or there may be a battery failure. Ensure the ambient temperature is between 10 °C and 40 °C before charging. You can also try disconnecting all cables, waiting one minute, and then reconnecting them, and connecting the power supply to the mains (110 or 220 Vac). If the LED is still red, it may indicate a battery failure. Contact your local Kongsberg Maritime office.

Kongsberg cNODE MiniS Specifications

General

Brand	Kongsberg
Model	cNODE MiniS
Category	Marine Radio
Language	English

Related product manuals

Kongsberg cNODE Micro

56 pages

Kongsberg cNODE

42 pages

Kongsberg RADius 1000

64 pages