To Next Page
A
amuellerAug 6, 2025
What to do if Kongsberg Marine Radio charger is flashing red?
- JJodi MartinezAug 6, 2025
If the Kongsberg Marine Radio charger's LED indicator is flashing red, it could be due to a failure in charger/transponder connection or the charger not being properly connected to the transponder. Try disconnecting all cables, wait for one minute, and then reconnect them. Ensure the power supply is connected to the mains (110 or 220 Vac). If the LED continues to flash red, the charger may be faulty. In this case, contact your local Kongsberg Maritime office.
General