Need help?Do you have a question about the Kongsberg cNODE and is the answer not in the manual?
General| Brand | Kongsberg |
|---|---|
| Model | cNODE |
| Category | Marine Radio |
| Language | English |
This manual is intended for all users of the system.
All end-user documentation can be downloaded from our website.
Observe the registered trademarks that apply. Windows® is a registered trademark of Microsoft Corporation.
The main units are supplied as standard. Includes PCB, Transducer, Transformer, Cable kit (optional), Quick Reference Guide.
General supply conditions apply to this cNODE Modem Embed delivery.
Inspect shipping containers for damage. Notify carrier and Kongsberg Discovery of any damage found during unpacking.
ESD is the sudden flow of electricity between charged objects, causing damage to printed circuit boards and electronic modules.
Procedure for connecting TD80V transducer cables, including prerequisites and wiring steps.
Procedure for connecting TD180 transducer cables, including prerequisites and wiring steps.
Procedure for connecting TD40V Mini transducer cables, including prerequisites and wiring steps.
Pin configuration for the female transducer connector J1, detailing pin number, colour, signal, and minimum requirements.
Pin configuration for the female modem top section interface connector J3, detailing pin number, signal, and minimum requirements.
Pin configuration for the female power connector J4, detailing pin number, colour, signal, and minimum requirements.
Pin configuration for the female service connector J5, detailing pin number, signal, and minimum requirements.
Factors affecting acoustic range, distinct from depth rating.
Directivity and coverage area of the vessel's system and its impact on transponder placement.
Different transducer types (omnidirectional vs. focused) and their coverage characteristics.
Signal detection depends on transmission power, adjustable for vessel and transponder.
Sources of acoustic noise on vessels like propellers, thrusters, and machinery, and their impact.
The transponder is operated from the HiPAP operator station APOS. See APOS online help for more information.
Details for TD80V spare part, including part name and number.
Details for TD180 spare part, including part name and number.
Details for TD40V spare part, including part name and number.
Details for the spare Printed Circuit Board (PCB), including part name and number.
Details for the spare capacitor, including part name and number.
Details for the spare TD80V transformer, including part name and number.
Details for the spare TD180/TD40V transformer, including part name and number.
Details for the spare cable kit, including part name and number, and its contents.
Lists operating frequency, responder trigger signal, depth rating, and internal tilt sensor specifications.
Provides weight and physical dimensions for PCB, TD80V, TD180, TD40V Mini, Capacitor, and Transformer.
Specifies voltage, nominal voltage, transmit power, and standby power requirements.
Details operating and storage temperature requirements for the equipment.
Diagram showing dimensions for the TD80V unit.
Diagram showing dimensions for the TD180 unit.
Diagram showing dimensions for the TD40V Mini unit.
Diagram showing dimensions for the Printed Circuit Board (PCB).
Wiring diagram for the cNODE Modem Embed TD80V Low.
Wiring diagram for the cNODE Modem Embed TD180.
Wiring diagram for the cNODE Modem Embed TD40V Mini.
To Next Page
